Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: Flash Frame - 1.: A flash frame is a single frame that is completely clear between two shots. It occurs when the camera is stopped with the gate open, allowing for a very long exposure on that single frame. Rather than a problem, a flash frame can actually be a very helpful thing in the editing room, making it very easy to see where one shot ends and another begins. This type of flash frame usually does not occur with spring wound cameras, like the Bolex, except when the spring winds all the way down, but the second type is something with which to be more concerned.
Learn more at Mark Cella film theory , Mark Cella film studies
Wednesday, February 25, 2009
Tuesday, February 24, 2009
Dupe
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today Dupe - A dupe is a positive copy of a positive. A dupe can also be a negative copy of a negative. A dupe is a print made in the reversal process. It can sometimes be clearer to call something a dupe, because to simply say “positive print” you could just mean a positive copy of a negative, which would not be a dupe
Learn more at Mark Cella film theory , Mark Cella film studies
Today Dupe - A dupe is a positive copy of a positive. A dupe can also be a negative copy of a negative. A dupe is a print made in the reversal process. It can sometimes be clearer to call something a dupe, because to simply say “positive print” you could just mean a positive copy of a negative, which would not be a dupe
Learn more at Mark Cella film theory , Mark Cella film studies
Thursday, February 19, 2009
Mark Cella's Extension
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today Extension Tubes - These are a handy way to turn any long lens into a macro lens for ultra-close shooting. They are hollow metal tubes that are mounted between the camera and the lens. Typically they come in a set of different lengths which can be combined. It is a good idea to open up the lens a little when using an extension tube, as a little light is lost. It should be noted that they do not work when used with wide lenses.
Learn more at Mark Cella film theory , Mark Cella film studies
Today Extension Tubes - These are a handy way to turn any long lens into a macro lens for ultra-close shooting. They are hollow metal tubes that are mounted between the camera and the lens. Typically they come in a set of different lengths which can be combined. It is a good idea to open up the lens a little when using an extension tube, as a little light is lost. It should be noted that they do not work when used with wide lenses.
Learn more at Mark Cella film theory , Mark Cella film studies
Wednesday, February 18, 2009
Flares
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: – Flare - This has two meanings: 1.: When using film on a daylight spool, the erratic pattern of raw light that washes out the beginning and end of the roll are known as “the flares.” 2.: A flare of the other kind is a Lens Flare. It is caused when light strikes the lens and either causes the entire image to be fogged in appearance, or for a little row of polygons (the silhouette of the iris) to appear from the light hitting the surfaces of the many elements in the lens. It is solved by flagging the lens.
Learn more at Mark Cella film theory , Mark Cella film studies
Today: – Flare - This has two meanings: 1.: When using film on a daylight spool, the erratic pattern of raw light that washes out the beginning and end of the roll are known as “the flares.” 2.: A flare of the other kind is a Lens Flare. It is caused when light strikes the lens and either causes the entire image to be fogged in appearance, or for a little row of polygons (the silhouette of the iris) to appear from the light hitting the surfaces of the many elements in the lens. It is solved by flagging the lens.
Learn more at Mark Cella film theory , Mark Cella film studies
Sunday, February 15, 2009
Filter
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Filter - A tinted glass or small tinted plastic sheet placed in front of the lens or behind the lens in a filter holder, used to change the color rendition of the entire shot. Filters are used to convert tungsten balanced film for use in daylight or vice versa. The can also be used for aesthetic reasons, such as a red filter to darken the sky when filming in black and white.
Learn more at Mark Cella film theory , Mark Cella film studies
Filter - A tinted glass or small tinted plastic sheet placed in front of the lens or behind the lens in a filter holder, used to change the color rendition of the entire shot. Filters are used to convert tungsten balanced film for use in daylight or vice versa. The can also be used for aesthetic reasons, such as a red filter to darken the sky when filming in black and white.
Learn more at Mark Cella film theory , Mark Cella film studies
Thursday, February 12, 2009
Foot Candles?
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: – Foot Candle - Measurement of light. One foot candle is the light of one candle, one foot away. Many light meters will use foot candles as a starting number, which then must be converted into an f-stop based on the sensitivity of the film you are using. (Because of the great variety of different film speeds it is sometimes ambiguous to talk too much about foot candles, since a given number of foot candles will not yield the same f-stop from one film speed to another.)
Learn more at Mark Cella film theory , Mark Cella film studies
Today: – Foot Candle - Measurement of light. One foot candle is the light of one candle, one foot away. Many light meters will use foot candles as a starting number, which then must be converted into an f-stop based on the sensitivity of the film you are using. (Because of the great variety of different film speeds it is sometimes ambiguous to talk too much about foot candles, since a given number of foot candles will not yield the same f-stop from one film speed to another.)
Learn more at Mark Cella film theory , Mark Cella film studies
Tuesday, February 10, 2009
Flare
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: – Flare - This has two meanings: 1.: When using film on a daylight spool, the erratic pattern of raw light that washes out the beginning and end of the roll are known as “the flares.” 2.: A flare of the other kind is a Lens Flare. It is caused when light strikes the lens and either causes the entire image to be fogged in appearance, or for a little row of polygons (the silhouette of the iris) to appear from the light hitting the surfaces of the many elements in the lens. It is solved by flagging the lens.
Learn more at Mark Cella film theory , Mark Cella film studies
Today: – Flare - This has two meanings: 1.: When using film on a daylight spool, the erratic pattern of raw light that washes out the beginning and end of the roll are known as “the flares.” 2.: A flare of the other kind is a Lens Flare. It is caused when light strikes the lens and either causes the entire image to be fogged in appearance, or for a little row of polygons (the silhouette of the iris) to appear from the light hitting the surfaces of the many elements in the lens. It is solved by flagging the lens.
Learn more at Mark Cella film theory , Mark Cella film studies
Monday, February 9, 2009
To The Edge
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: Edge Numbers
Edge Numbers or Latent Edge Numbers - 1.: The edge numbers are small numbers running along the edge of the film, in between the perf in 16mm, and just to the far side of them in 35mm. The are photographed onto the film in its manufacture, and are there to aid the negative cutter in lining up shots in the process of conforming the negative. They are sometimes called latent edge numbers to distinguish them from inked-on code numbers. 2.: Code Numbers are sometimes called edge numbers.
Learn more at Mark Cella film theory , Mark Cella film studies
Today: Edge Numbers
Edge Numbers or Latent Edge Numbers - 1.: The edge numbers are small numbers running along the edge of the film, in between the perf in 16mm, and just to the far side of them in 35mm. The are photographed onto the film in its manufacture, and are there to aid the negative cutter in lining up shots in the process of conforming the negative. They are sometimes called latent edge numbers to distinguish them from inked-on code numbers. 2.: Code Numbers are sometimes called edge numbers.
Learn more at Mark Cella film theory , Mark Cella film studies
Thursday, February 5, 2009
Master Fade
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: Master Fade
A transition from a shot to black where the image gradually becomes darker is a Fade Out; or from black where the image gradually becomes brighter is a Fade In. Fades are done at the lab in the printing phase, but prepared by the negative cutter, who cuts in an overlap of black into the A&B rolls. Labs will only do fades in fixed amounts, such as 24 frames, 48 frames, etc.
Learn more at Mark Cella film theory , Mark Cella film studies
Today: Master Fade
A transition from a shot to black where the image gradually becomes darker is a Fade Out; or from black where the image gradually becomes brighter is a Fade In. Fades are done at the lab in the printing phase, but prepared by the negative cutter, who cuts in an overlap of black into the A&B rolls. Labs will only do fades in fixed amounts, such as 24 frames, 48 frames, etc.
Learn more at Mark Cella film theory , Mark Cella film studies
Wednesday, February 4, 2009
Fill The Sound
Mark A. Cella is a distinguished fellow of film studies at California State University in Los Angeles. He’s a published writer on Cinema History and Film Theory. He has directed over 35 shorts and documentaries, including the award winning “Marlboro House”, which took top prize at the 2006 Slamdance short competition.
Today: Sound Fill
Filler, Fill or Sound Fill - Filler is scrap film, most often used to keep a sound track running the same length as the picture, even though there is just silence. When used this way in can also be called sound fill. Filler is usually a print with the emulsion scraped off the center all the way along, perhaps to prevent bootlegging, but also useful in that a mark can be seen on both sides through this wide scratch.
Learn more at Mark Cella film theory , Mark Cella film studies
Today: Sound Fill
Filler, Fill or Sound Fill - Filler is scrap film, most often used to keep a sound track running the same length as the picture, even though there is just silence. When used this way in can also be called sound fill. Filler is usually a print with the emulsion scraped off the center all the way along, perhaps to prevent bootlegging, but also useful in that a mark can be seen on both sides through this wide scratch.
Learn more at Mark Cella film theory , Mark Cella film studies
Subscribe to:
Comments (Atom)